Free delivery to Finland on orders over 50 EUR

Accessories

CAN bus Products

Kvaser OBD II Extension Cable 2,5 – 15 m

Male to female OBD II connectors

Kvaser’s OBD II Extension Cable is a highly durable extension cable of 2,5-15 metres in length with male to female OBD II connectors. The cable is made of high quality thermoplastic rubber to ensure excellent flexibility and resilience. All pins are connected.
Kvaser OBD II Dsub9 Adapter 30 cm

Standard 9-pin Dsub and OBDII connector adaptor

Kvaser OBD II Dsub9 Adapter 30 cm with standard 9-pin Dsub and OBDII connector adaptor connects the Kvaser Leaf v3 to any vehicle with an OBDII port.

Buy online
Kvaser OBD II to Dsub9 Adapter Cable

DSUB9 female to OBD II (J1962) adaptor

Connects any Kvaser CAN bus interface with a DSUB9 female connector to any vehicle with an OBD II (J1962) connector.
Kvaser DB9-Power Inlet

a Power injector for CAN busses

Kvaser DB9-Power Inlet is a power injector for CAN busses from a DC power jack into one female D-SUB9 connector. The Kvaser DB9-Power Inlet also has one unpowered male D-SUB9 connector for connecting to the CAN network.
Kvaser T-Cannector v2

CAN bus hub with three female and one male D-SUB9 connectors.

Offering an adjustable CAN termination resistor (120/60/0 Ohm) it provides an affordable and safe way of terminating the CAN circuit when using Kvaser interfaces on a development board, as well as powering interface devices without internal power, such as Kvaser’s Blackbird and Memorator series.

Buy online
Kvaser Q-cable 25 pin Dsub to four 9 pin Dsub

Adapter cable for the Kvaser PCIcanx 4xHS and Kvaser PCIcan 4xHS boards

The Q-Cable is a 0.3m (approx. 0.98 ft) long adapter cable for the Kvaser PCIcanx 4xHS and Kvaser PCIcan 4xHS boards. A DSUB male connector connects to the PCIcan board, whilst four DSUB male connectors connect to the CANbus.
Kvaser 120 Ohm termination adapter

D-sub 9 pin, 120 ohm resistor for terminating the CAN bus

Kvaser D-sub 9 pin 120 Ohm termination adapter is a CAN adaptor with a 9-pin male D-Sub connector at one end and a 9-pin female D-Sub socket at the other. Between CAN High (pin 7) and CAN Low (pin 2) there is a built-in 120 Ohm CAN terminating resistor.

Buy online

footer_vehiles

TK Engineering Oy

Hovioikeudenpuistikko 13 as 3
65100 Vaasa, Finland

Kauppakatu 3 B
33200 Tampere, Finland

info@tke.fi
Phone: +358 6 357 6300

Highest creditworthiness