Kvaser Leaf v3 M12

Product Code: 73-30130-01428-2

285,00 €

Robust interface with a 5-pin M12 connector.

The Kvaser Leaf v3 M12 is a versatile and reliable interface for connecting a computer to a CAN bus network in automation, industrial, and marine environments. It features a 5-pin A-coded M12 connector, widely used for CAN bus connections in maritime and industrial automation applications.

Galvanic isolation

Capable of handling up to 20,000 messages per second, each timestamped with 50-microsecond accuracy, the Leaf v3 M12 requires no external power and features standard galvanic isolation.

Kvaser Leaf v3 is a successor to the Kvaser Leaf Light HS v2 with D-SUB connector. For rugged and higher voltage applications, the Kvaser U100 remains the best choice, whilst multichannel USB to CAN interfaces can be found in the Kvaser USBcan range.

Effortless CAN Network Connectivity with Kvaser Leaf Series

Stable, trouble-free operation, with added CAN FD and silent mode. The Kvaser Leaf series represents one of the easiest and lowest-cost methods of connecting a computer to a CAN network to monitor and transmit CAN and CAN FD frames.

Major Features

• 20 000 messages per second, each time stamped with a resolution of 50 μs.
• Supports CAN FD, up to 8 Mbit/s.
• Powered through the standard USB type “A” connector.
• Quick and easy plug-and-play installation.
• Supports silent mode for analysis tools – listen to the bus without interfering.
• Galvanic isolation comes as standard on the Leaf v3, enhancing protection from power surges or electrical shocks.
• Use with Kvaser free general-purpose CAN monitoring software and a wide variety of advanced software for ECU development, diagnostics and calibration from Kvaser’s network of Technical Associates.
• Support for SocketCAN.
• Host OS Windows (7 or later), Linux.
• Supports J1939, CANopen, NMEA 2000® and DeviceNet when paired with advanced software from one of our many Technical Associates.
• Supports simultaneous use of multiple Kvaser interfaces.