Kvaser Leaf v3 J1939-13 Type II

Product Code: 73-30130-01426-8

285,00 €

Robust and versatile interface with 9-pin J1939-13 connector for monitoring and managing vehicle CAN networks.

The Kvaser Leaf v3 J1939-13 is a reliable tool for connecting a computer to a CAN bus network, enabling the monitoring and transmission of CAN and CAN FD data. It features a USB Type-A connector and a 9-pin J1939-13 Type II connector; the latter is commonly used for diagnostics and communication in heavy-duty vehicles. The Type II connector, colour-coded in green and supporting either 250 Kbps or 500 Kbps, is backward-compatible with the older Type I connector, colour-coded in black and limited to 250 Kbps.

Galvanic isolation

Capable of processing up to 20,000 messages per second, each timestamped with 50-microsecond accuracy. Offering excellent value, the Kvaser Leaf v3 J1939-13 ensures reliable communication for vehicle networks where the J1939 protocol is critical.

Kvaser Leaf v3 is a successor to the Kvaser Leaf Light HS v2 with D-SUB connector. For rugged and higher voltage applications, the Kvaser U100 remains the best choice, whilst multichannel USB to CAN interfaces can be found in the Kvaser USBcan range.

Effortless CAN Network Connectivity with Kvaser Leaf Series

Stable, trouble-free operation, with added CAN FD and silent mode. The Kvaser Leaf series represents one of the easiest and lowest-cost methods of connecting a computer to a CAN network to monitor and transmit CAN and CAN FD frames.

Major Features

• 20 000 messages per second, each time stamped with a resolution of 50 μs.
• Supports CAN FD, up to 8 Mbit/s.
• Powered through the standard USB type “A” connector.
• Quick and easy plug-and-play installation.
• Supports silent mode for analysis tools – listen to the bus without interfering.
• Galvanic isolation comes as standard on the Leaf Light v2, enhancing protection from power surges or electrical shocks.
• Use with Kvaser free general-purpose CAN monitoring software and a wide variety of advanced software for ECU development, diagnostics and calibration from Kvaser’s network of Technical Associates.
• Support for SocketCAN.
• Host OS Windows (7 or later), Linux.
• Supports J1939, CANopen, NMEA 2000® and DeviceNet when paired with advanced software from one of our many Technical Associates.
• Supports simultaneous use of multiple Kvaser interfaces.