TKE DEVD-10

Product code: TKE DEVD-10

CANopen Deutsch Valve Driver

DEVD-10 valve driver is a new approach to integrate existing hydraulic valves with CANopen®-network. This unit gives a very cost efficient CANopen® interface individually for each coil. Thanks to it's design it can be mounted to most valves on the market.

Operational modes

The DEVD-10 valve driver has got three different operational modes: - On-off - Positive direction closed-loop PWM - Negative direction closed-loop PWM Current monitoring is active in all operating modes.

CANopen® interface

The physical CAN interface in the DEVD-10 valve driver is according to ISO11898-2 High-speed CAN physical layer. Cost-optimised CANopen® interface is according to the following standards: - CiA® DSP 301 version 4.1.1 - CiA® DR 303-1 version 1.4 - CiA® WD 401 version 2.1.9

Connectors

DEVD-10 valve driver has got open end cables, alternatively Bosch Compact style connectors for power supply and CAN. Valve coil connector is 2-pole Deutsch DT06.

Some features of DEVD-10 valve driver

Power from the CAN-bus Compact dimensions 77 x 37 x 28 mm Meets CiA301, CiA 303-1 and CiA 401 RPDO timeout monitoring Automatic output shutdown on RPDO timeout Automatic thermal shutdown of the output  

 

Additional info

Product specifications

  • Deutsch DT06 connector for coil
  • RPDO timeout monitoring with automatic shutdown on error
  • Supply voltage 7...36 VDC
  • Continuous coil current monitoring in all operating modes
  • Closed loop current control
  • Dither
  • Dead band compensation
  • ±4kV contact discharge and ±8kV HMB air discharge for power supply and CAN
  • Supply Current max. 175mA typ. 75mA
  • Output current max. 2 A (possibility to get up to 4 A in on/off mode)
  • Operating temperature -40°C…+85°C
  • Environmental protection IP65+
  • CAN baud rate 125k/250k/500k/800k/1M
  • CAN voltage tolerance up to ±36VDC

Interested in TKE DEVD-10?

Contact info@tke.fi for more info.